diff options
Diffstat (limited to 'test/s3/cors/Makefile')
| -rw-r--r-- | test/s3/cors/Makefile | 337 |
1 files changed, 337 insertions, 0 deletions
diff --git a/test/s3/cors/Makefile b/test/s3/cors/Makefile new file mode 100644 index 000000000..e59124a6a --- /dev/null +++ b/test/s3/cors/Makefile @@ -0,0 +1,337 @@ +# CORS Integration Tests Makefile +# This Makefile provides comprehensive targets for running CORS integration tests + +.PHONY: help build-weed setup-server start-server stop-server test-cors test-cors-quick test-cors-comprehensive test-all clean logs check-deps + +# Configuration +WEED_BINARY := ../../../weed/weed_binary +S3_PORT := 8333 +MASTER_PORT := 9333 +VOLUME_PORT := 8080 +FILER_PORT := 8888 +TEST_TIMEOUT := 10m +TEST_PATTERN := TestCORS + +# Default target +help: + @echo "CORS Integration Tests Makefile" + @echo "" + @echo "Available targets:" + @echo " help - Show this help message" + @echo " build-weed - Build the SeaweedFS binary" + @echo " check-deps - Check dependencies and build binary if needed" + @echo " start-server - Start SeaweedFS server for testing" + @echo " start-server-simple - Start server without process cleanup (for CI)" + @echo " stop-server - Stop SeaweedFS server" + @echo " test-cors - Run all CORS tests" + @echo " test-cors-quick - Run core CORS tests only" + @echo " test-cors-simple - Run tests without server management" + @echo " test-cors-comprehensive - Run comprehensive CORS tests" + @echo " test-with-server - Start server, run tests, stop server" + @echo " logs - Show server logs" + @echo " clean - Clean up test artifacts and stop server" + @echo " health-check - Check if server is accessible" + @echo "" + @echo "Configuration:" + @echo " S3_PORT=${S3_PORT}" + @echo " TEST_TIMEOUT=${TEST_TIMEOUT}" + +# Build the SeaweedFS binary +build-weed: + @echo "Building SeaweedFS binary..." + @cd ../../../weed && go build -o weed_binary . + @chmod +x $(WEED_BINARY) + @echo "✅ SeaweedFS binary built at $(WEED_BINARY)" + +check-deps: build-weed + @echo "Checking dependencies..." + @echo "🔍 DEBUG: Checking Go installation..." + @command -v go >/dev/null 2>&1 || (echo "Go is required but not installed" && exit 1) + @echo "🔍 DEBUG: Go version: $$(go version)" + @echo "🔍 DEBUG: Checking binary at $(WEED_BINARY)..." + @test -f $(WEED_BINARY) || (echo "SeaweedFS binary not found at $(WEED_BINARY)" && exit 1) + @echo "🔍 DEBUG: Binary size: $$(ls -lh $(WEED_BINARY) | awk '{print $$5}')" + @echo "🔍 DEBUG: Binary permissions: $$(ls -la $(WEED_BINARY) | awk '{print $$1}')" + @echo "🔍 DEBUG: Checking Go module dependencies..." + @go list -m github.com/aws/aws-sdk-go-v2 >/dev/null 2>&1 || (echo "AWS SDK Go v2 not found. Run 'go mod tidy'." && exit 1) + @go list -m github.com/stretchr/testify >/dev/null 2>&1 || (echo "Testify not found. Run 'go mod tidy'." && exit 1) + @echo "✅ All dependencies are available" + +# Start SeaweedFS server for testing +start-server: check-deps + @echo "Starting SeaweedFS server..." + @echo "🔍 DEBUG: Current working directory: $$(pwd)" + @echo "🔍 DEBUG: Checking for existing weed processes..." + @ps aux | grep weed | grep -v grep || echo "No existing weed processes found" + @echo "🔍 DEBUG: Cleaning up any existing PID file..." + @rm -f weed-server.pid + @echo "🔍 DEBUG: Checking for port conflicts..." + @if netstat -tlnp 2>/dev/null | grep $(S3_PORT) >/dev/null; then \ + echo "⚠️ Port $(S3_PORT) is already in use, trying to find the process..."; \ + netstat -tlnp 2>/dev/null | grep $(S3_PORT) || true; \ + else \ + echo "✅ Port $(S3_PORT) is available"; \ + fi + @echo "🔍 DEBUG: Checking binary at $(WEED_BINARY)" + @ls -la $(WEED_BINARY) || (echo "❌ Binary not found!" && exit 1) + @echo "🔍 DEBUG: Checking config file at ../../../docker/compose/s3.json" + @ls -la ../../../docker/compose/s3.json || echo "⚠️ Config file not found, continuing without it" + @echo "🔍 DEBUG: Creating volume directory..." + @mkdir -p ./test-volume-data + @echo "🔍 DEBUG: Launching SeaweedFS server in background..." + @echo "🔍 DEBUG: Command: $(WEED_BINARY) server -debug -s3 -s3.port=$(S3_PORT) -s3.allowEmptyFolder=false -s3.allowDeleteBucketNotEmpty=true -s3.config=../../../docker/compose/s3.json -filer -filer.maxMB=64 -master.volumeSizeLimitMB=50 -volume.max=100 -dir=./test-volume-data -volume.preStopSeconds=1 -metricsPort=9324" + @$(WEED_BINARY) server \ + -debug \ + -s3 \ + -s3.port=$(S3_PORT) \ + -s3.allowEmptyFolder=false \ + -s3.allowDeleteBucketNotEmpty=true \ + -s3.config=../../../docker/compose/s3.json \ + -filer \ + -filer.maxMB=64 \ + -master.volumeSizeLimitMB=50 \ + -volume.max=100 \ + -dir=./test-volume-data \ + -volume.preStopSeconds=1 \ + -metricsPort=9324 \ + > weed-test.log 2>&1 & echo $$! > weed-server.pid + @echo "🔍 DEBUG: Server PID: $$(cat weed-server.pid 2>/dev/null || echo 'PID file not found')" + @echo "🔍 DEBUG: Checking if PID is still running..." + @sleep 2 + @if [ -f weed-server.pid ]; then \ + SERVER_PID=$$(cat weed-server.pid); \ + ps -p $$SERVER_PID || echo "⚠️ Server PID $$SERVER_PID not found after 2 seconds"; \ + else \ + echo "⚠️ PID file not found"; \ + fi + @echo "🔍 DEBUG: Waiting for server to start (up to 90 seconds)..." + @for i in $$(seq 1 90); do \ + echo "🔍 DEBUG: Attempt $$i/90 - checking port $(S3_PORT)"; \ + if curl -s http://localhost:$(S3_PORT) >/dev/null 2>&1; then \ + echo "✅ SeaweedFS server started successfully on port $(S3_PORT) after $$i seconds"; \ + exit 0; \ + fi; \ + if [ $$i -eq 5 ]; then \ + echo "🔍 DEBUG: After 5 seconds, checking process and logs..."; \ + ps aux | grep weed | grep -v grep || echo "No weed processes found"; \ + if [ -f weed-test.log ]; then \ + echo "=== First server logs ==="; \ + head -20 weed-test.log; \ + fi; \ + fi; \ + if [ $$i -eq 15 ]; then \ + echo "🔍 DEBUG: After 15 seconds, checking port bindings..."; \ + netstat -tlnp 2>/dev/null | grep $(S3_PORT) || echo "Port $(S3_PORT) not bound"; \ + netstat -tlnp 2>/dev/null | grep 9333 || echo "Port 9333 not bound"; \ + netstat -tlnp 2>/dev/null | grep 8080 || echo "Port 8080 not bound"; \ + fi; \ + if [ $$i -eq 30 ]; then \ + echo "⚠️ Server taking longer than expected (30s), checking logs..."; \ + if [ -f weed-test.log ]; then \ + echo "=== Recent server logs ==="; \ + tail -20 weed-test.log; \ + fi; \ + fi; \ + sleep 1; \ + done; \ + echo "❌ Server failed to start within 90 seconds"; \ + echo "🔍 DEBUG: Final process check:"; \ + ps aux | grep weed | grep -v grep || echo "No weed processes found"; \ + echo "🔍 DEBUG: Final port check:"; \ + netstat -tlnp 2>/dev/null | grep -E "(8333|9333|8080)" || echo "No ports bound"; \ + echo "=== Full server logs ==="; \ + if [ -f weed-test.log ]; then \ + cat weed-test.log; \ + else \ + echo "No log file found"; \ + fi; \ + exit 1 + +# Stop SeaweedFS server +stop-server: + @echo "Stopping SeaweedFS server..." + @if [ -f weed-server.pid ]; then \ + SERVER_PID=$$(cat weed-server.pid); \ + echo "Killing server PID $$SERVER_PID"; \ + if ps -p $$SERVER_PID >/dev/null 2>&1; then \ + kill -TERM $$SERVER_PID 2>/dev/null || true; \ + sleep 2; \ + if ps -p $$SERVER_PID >/dev/null 2>&1; then \ + echo "Process still running, sending KILL signal..."; \ + kill -KILL $$SERVER_PID 2>/dev/null || true; \ + sleep 1; \ + fi; \ + else \ + echo "Process $$SERVER_PID not found (already stopped)"; \ + fi; \ + rm -f weed-server.pid; \ + else \ + echo "No PID file found, checking for running processes..."; \ + echo "⚠️ Skipping automatic process cleanup to avoid CI issues"; \ + echo "Note: Any remaining weed processes should be cleaned up by the CI environment"; \ + fi + @echo "✅ SeaweedFS server stopped" + +# Show server logs +logs: + @if test -f weed-test.log; then \ + echo "=== SeaweedFS Server Logs ==="; \ + tail -f weed-test.log; \ + else \ + echo "No log file found. Server may not be running."; \ + fi + +# Core CORS tests (basic functionality) +test-cors-quick: check-deps + @echo "Running core CORS tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSConfigurationManagement|TestCORSPreflightRequest|TestCORSActualRequest" . + @echo "✅ Core CORS tests completed" + +# All CORS tests (comprehensive) +test-cors: check-deps + @echo "Running all CORS tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "$(TEST_PATTERN)" . + @echo "✅ All CORS tests completed" + +# Comprehensive CORS tests (all features) +test-cors-comprehensive: check-deps + @echo "Running comprehensive CORS tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORS" . + @echo "✅ Comprehensive CORS tests completed" + +# All tests without server management +test-cors-simple: check-deps + @echo "Running CORS tests (assuming server is already running)..." + @go test -v -timeout=$(TEST_TIMEOUT) . + @echo "✅ All CORS tests completed" + +# Start server, run tests, stop server +test-with-server: start-server + @echo "Running CORS tests with managed server..." + @sleep 5 # Give server time to fully start + @make test-cors-comprehensive || (echo "Tests failed, stopping server..." && make stop-server && exit 1) + @make stop-server + @echo "✅ All tests completed with managed server" + +# Health check +health-check: + @echo "Checking server health..." + @if curl -s http://localhost:$(S3_PORT) >/dev/null 2>&1; then \ + echo "✅ Server is accessible on port $(S3_PORT)"; \ + else \ + echo "❌ Server is not accessible on port $(S3_PORT)"; \ + exit 1; \ + fi + +# Clean up +clean: + @echo "Cleaning up test artifacts..." + @make stop-server + @rm -f weed-test.log + @rm -f weed-server.pid + @rm -rf ./test-volume-data + @rm -f cors.test + @go clean -testcache + @echo "✅ Cleanup completed" + +# Individual test targets for specific functionality +test-basic-cors: + @echo "Running basic CORS tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSConfigurationManagement" . + +test-preflight-cors: + @echo "Running preflight CORS tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSPreflightRequest" . + +test-actual-cors: + @echo "Running actual CORS request tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSActualRequest" . + +test-origin-matching: + @echo "Running origin matching tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSOriginMatching" . + +test-header-matching: + @echo "Running header matching tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSHeaderMatching" . + +test-method-matching: + @echo "Running method matching tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSMethodMatching" . + +test-multiple-rules: + @echo "Running multiple rules tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSMultipleRulesMatching" . + +test-validation: + @echo "Running validation tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSValidation" . + +test-caching: + @echo "Running caching tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSCaching" . + +test-error-handling: + @echo "Running error handling tests..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSErrorHandling" . + +# Development targets +dev-start: start-server + @echo "Development server started. Access S3 API at http://localhost:$(S3_PORT)" + @echo "To stop: make stop-server" + +dev-test: check-deps + @echo "Running tests in development mode..." + @go test -v -timeout=$(TEST_TIMEOUT) -run "TestCORSConfigurationManagement" . + +# CI targets +ci-test: check-deps + @echo "Running tests in CI mode..." + @go test -v -timeout=$(TEST_TIMEOUT) -race . + +# All targets +test-all: test-cors test-cors-comprehensive + @echo "✅ All CORS tests completed" + +# Benchmark targets +benchmark-cors: + @echo "Running CORS performance benchmarks..." + @go test -v -timeout=$(TEST_TIMEOUT) -bench=. -benchmem . + +# Coverage targets +coverage: + @echo "Running tests with coverage..." + @go test -v -timeout=$(TEST_TIMEOUT) -coverprofile=coverage.out . + @go tool cover -html=coverage.out -o coverage.html + @echo "Coverage report generated: coverage.html" + +# Format and lint +fmt: + @echo "Formatting Go code..." + @go fmt . + +lint: + @echo "Running linter..." + @golint . || echo "golint not available, skipping..." + +# Install dependencies for development +install-deps: + @echo "Installing Go dependencies..." + @go mod tidy + @go mod download + +# Show current configuration +show-config: + @echo "Current configuration:" + @echo " WEED_BINARY: $(WEED_BINARY)" + @echo " S3_PORT: $(S3_PORT)" + @echo " TEST_TIMEOUT: $(TEST_TIMEOUT)" + @echo " TEST_PATTERN: $(TEST_PATTERN)" + +# Legacy targets for backward compatibility +test: test-with-server +test-verbose: test-cors-comprehensive +test-single: test-basic-cors +test-clean: clean +build: check-deps +setup: check-deps
\ No newline at end of file |